medium beam
  • led
  • EL_optional
  • IP65
  • ce
  • protection_class_II
  • brandschutz_d
  • IK04_PMMA

Ammonia resistant polymer luminaire with LED lamp, single or twin lamp. Useable in stables, research facilities or aviaries with high ammonia levels and special safety requirements. Weather-proof luminaire housing made of fibreglass reinforced polymer, similar to RAL 9010. Useable for indoor and outdoor areas according to protection rating IP 65 (single or twin lamp) resp. IP 67 (single lamp). Thermally separated lamp chamber and driver chamber. Fume-proof, short sealing system consisting of age-resistant, form-retaining silicone/synthetic rubber. With reflector tubes that can be swivelled independently, made of PMMA Transopal® (impact strengthened) with internal aluminium reflector (MIRO-SILVER®). Reflector tube can be locked in steps of 10°. Luminaire ready for mounting and installation. Built-in, ammonia resistant driver 230 V AC/DC, optionally suitable for emergency lighting. One access cover, one M20 cable gland on face side. Ready for connection via ammonia resistant connecting cable (2 m). Optional through wiring. 2 kV transient filter. Single mounting. Ceiling or wall fixing using two polymer mounting clamps with variable mounting distance.

Version
m1500
Lamp
LED
Number of lamps
2-lamp
Luminous flux lamp
10560 lm
LOR
97.7 %
Luminous flux luminaire
10317 lm
max. System power
56 W
Luminaire efficacy
184.2 lm/W
Colour temperature
White, 840/4000 K, Ra > 80
Colour consistency (McAdam ellipse)
SDCM3
Lamp service life
L80 B10 > 60,000 h at +40°C
Ambient temperature
-25°C to +40°C
Type of gear
LED operating device current-controlled,
No dim function, 230 V - 240 V AC/DC
EL (Emergency Lighting)
optional
DC level set at factory
100 %
Transient protection
2 kV
Max. number of luminaires Circuit breaker B16
26
Max. Number of luminaires Circuit breaker C16
43
Connection method
Connecting wire (2 m) 2 x 2.5 mm²
Through-wiring
without
Housing material
polymer
Colour housing
White
Cover
reflector tube
Material of the cover
PMMA Transopal® (impact strengthened)
Light distribution
medium beam
Adjustability
Swivelling
UGR Value (4H8H)*
20.3
Protection class
II
IP-rating
IP65
Impact strength
IK04
Manufacturer warranty
5 years
Installation type
Surface mounting, ceiling mounting, wall mounting, single mounting, suspension system
Replaceability of control gear
control gear replaceable by professional
Replaceability of light unit
Reflector tube replaceable by professional
Energy efficiency class of the light source
C
* The above mentioned UGR is based on example calculations. The effective value can only be determined with a light calculation.
Dimensional Drawing
Length
1551 mm ± 2 mm
Width
242 mm
Height
144 mm
Mounting dimension a
1220 mm ± 80 mm
Max. weight
4,6 kg
Light distribution curveLOR: 97 %
Options

Selected options will appear on the datasheet.

Version
  • article-number:100530
  • article-number:445010
  • article-number:On request
  • article-number:On request
  • article-number:100922
  • article-number:445960
  • article-number:445933
  • article-number:On request