FULDA LED DB

AREAS OF APPLICATION
Polymer luminaire for ceiling and wall mounting with LED lamps. Useable in work pits used for maintenance and repair work. Suitable for production facilities and suppliers for the food and beverage industry, work pits, underpasses, underground and suburban railway stations and passages.

HOUSING
Acid, alkaline and fuel-resistant luminaire housing made of fibreglass-reinforced polymer, similar to RAL 9010. Useable for indoor and outdoor areas according to protection rating IP 66. Suitable for intensive cleaning processes using pressure washers due to high protection rating IP 69K. Thermally separated lamp chamber and driver chamber. Short sealing system consisting of age-resistant, form-retaining silicone/synthetic rubber. Anti-graffiti coating for lamp diffuser optionally available (protects against dirt and paint residue, see options).

LIGHTING TECHNOLOGY
Lamp diffuser made of PMMA Transopal^® (impact strengthened) with inner aluminium reflector (MIRO-SILVER^®). Optimum colour rendering of red tones by special LED modules with an increased R9 value (> 77).

ELECTRICAL CONSTRUCTION
Luminaire ready for mounting and installation. Two cable glands on face side M20 and 4 x 1.5 mm² through wiring. DB (Deutsche Bahn) version: Built-in driver with secondary safety extra low voltage according to DIN VDE 0100-410 (SELV). Optimised with additional inrush current limiter (ESSB II). 4 kV transient filter.

MOUNTING
Single or row mounting. Ceiling, wall or corner fixing using two stainless steel mounting plates.

NOTE DB (Deutsche Bahn) VERSION:
Listed: DB InfraGO Fahrweg – Group 2.